@article { author = {Tahmasebi Birgani, Mohammad Javad and Zabihzadeh, Mansoor and Asgarian Dehkordi, Zeynab and rezaee, hadi and Razmjoo, Sasan and Einy, Fariba and Tabari Juybari, Raheleh}, title = {Determination of Output Factor of Electron Beams for Varian2100 CD Accelerator Installed in Radiotherapy Department of Ahvaz-Golestan Hospital to Cancer Patients’ Treatment}, journal = {Jundishapur Scientific Medical Journal}, volume = {14}, number = {2}, pages = {199-208}, year = {2015}, publisher = {Ahvaz Jundishapur University of Medical Sciences}, issn = {2252-052X}, eissn = {2252-0619}, doi = {}, abstract = {Background and Objectives: Electron beams, due to its fast reduction in dose, are widely used for the treatment of superficial tumors. The small fields are needed in order to achieve the optimal plan of treatment during electron therapy of small tumors. But lack of full lateral scattering equilibrium is a crucial obstacle during measuring of the output factor.The aim of this study is to find an analytical equation for the output factors of Varian2100 CD accelerator for different fields and energies. Subjects and Methods: Varian2100 CD accelerator and 0.6 cc Farmer dosimeter located in reference depth inside the water phantom were used, to dose measurement. Using present applicators and shielding blocks inserted at the end scraper of 10 ´ 10 cm2 applicator, electron fields size range from 2 ´ 2 cm2 to 20 ´ 20 cm2 were established. Output factors for energies of 4, 6, 9, 12 and 15 MeV were measured and related equations were extracted. Results: The best fit polynomial functions on the measured output factors were extracted. Low (4 MeV) and high (15 MeV) electron beams followed - 3.143 L-2.51+1.031 (R=0.97) and -2.165L-2.02+1008(R=0.98) equations respectively. Output factors increase initially with increased field size up to 6´ 6 cm2 and then reach to the plateau around 15´ 5 cm2. Conclusion: The obtained analytical equations can be used to calculate the needed output factors for all the field sizes and electron beams energies.  }, keywords = {Determination of Output Factor of Electron Beams for Varian2100 CD AcceleratorInstalled in Radiotherapy Department of Ahvaz-Golestan Hospital to Cancer Patients’Treatment}, title_fa = {تعیین فاکتور خروجی پرتوهای الکترونی شتاب‌دهندۀ Varian2100CD جهت درمان بیماران مبتلا به سرطان بیمارستان گلستان اهواز}, abstract_fa = {زمینه و هدف: باریکه­های الکترونی به­دلیل افت سریع دوز به طور وسیعی، برای درمان تومورهای سطحی به‏کار می­روند. دست یابی به یک طرح درمان بهینه در الکترون­تراپی تومورهای کوچک مستلزم استفاده از میدان­های کوچک است. اما نبود تعادل پراکندگی جانبی کامل مانع مهمی در اندازه­گیری فاکتور خروجی است. هدف از این پژوهش به­دست آوردن یک رابطۀ تحلیلی جهت تعیین فاکتور خروجی برای میدان­ها و انرژی­های الکترونی مختلف شتاب­دهندۀ Varian2100CD می­باشد. روش بررسی: از شتابدهنده Varian2100CD و دزیمتر صفحات موازی جاگذاری شده در عمق مرجع هر انرژی در داخل فانتوم آب برای اندازه­گیری دز استفاده شد. با استفاده از اپلیکاتورهای موجود و بلوک ­ای سروبندی قرار داده شده در انتهای اپلیکاتور cm210×10، میدان­های الکترونی 2×2 تا 20×20 ساخته شدند .فاکتور خروجی برای انرژی­های 4، 6، 9، 12 و 15 مگاالکنرون ولت اندازه­گیری شد و معادلات مربوط استخراج شدند. یافته­ها: بهترین توابع توانی برازش­شده بر روی فاکتورهای خروجی اندازه­گیری شده، استخراج شدند. برای پرتوهای الکترونی با انرژی کم (MeV4) و بالا (MeV15)، فاکتور خروجی از رابطۀ 3.143L-2.51+1.031 (R=0.97)- و (2.165L-2.02+1008 (R=0.98- پیروی می­کند. فاکتورهای خروجی در ابتدا با افزایش اندازۀ میدان تا cm2 6 ´ 6 افزایش می­یابند و سپس در حدود cm2 15 ´ 15 به یک حالت اشباع می­رسند. نتیجه­گیری: روابط تحلیلی به­دست آمده می­توانند برای محاسبۀ فاکتورهای خروجی لازم برای تمام اندازۀ میدان­های کاربردی و انرژی­های باریکۀ الکترونی استفاده شوند.}, keywords_fa = {درمان با باریکۀ الکترون,دوزیمتری میدان‌های درمانی,فاکتور خروجی}, url = {https://jsmj.ajums.ac.ir/article_47042.html}, eprint = {https://jsmj.ajums.ac.ir/article_47042_bddd4a0cc6bb8670d3d8c16daf02d235.pdf} }