@article { author = {Tahmasebi Birgani, Mohammad Javad and Farhadi Birgani, Fariba and Behrooz, Mohammad Ali and Ali Behrooz, Seyed Mohammad and Maghsoodi Niya, Fateme}, title = {Evaluation of Change in Attenuation Coefficient of Cerrobend Block Used for Radiation Protection of Healthy Tissues in Megavoltage Photon Radiation Therapy after Multiple Melting}, journal = {Jundishapur Scientific Medical Journal}, volume = {13}, number = {3}, pages = {266-274}, year = {2014}, publisher = {Ahvaz Jundishapur University of Medical Sciences}, issn = {2252-052X}, eissn = {2252-0619}, doi = {}, abstract = {Background and Objective: Protecting the vital organs in radiation therapy is one of the most important issues. Cerrobend alloy, the most common material used as the shield, is melted several times and used for different patients. In this study changes in attenuation coefficient of cerrobend due to melting was investigated. Subjects and Methods: In melting furnace, cerrobend was melted up to nine times and irradiated by Varian accelerator at radiotherapy department of Golestan hospital and the dose was measured by CC-13 ionization chamber with and without cerrobend blocks. The attenuation coefficients of cerrobend blocks were measured for irradiation fields of 6 × 6 cm2 and 10 × 10 cm2 at the photon energies of 6 mv and 18mv and analyzed by statistical methods. Results: Results of regression analysis with P>0.05, indicated that there was a significant relationship between the attenuation coefficient and frequencies of cerrobend melting: the attenuation coefficient increases with the increasing frequency of cerrobend melting. Conclusion: Continuous increasing in the frequency of cerrobend melting leads to increase in the attenuation coefficient of cerrobend block, thus cerrobend blocks can be used for patients, safely.}, keywords = {Cerrobend block,Shielding,Beam collimation,Compensator,Attenuation coefficient}, title_fa = {بررسی میزان تغییرات ضریب تضعیف بلوک‌های سروبند در دفعات ذوب متوالی برای شیلدینگ اندام‌های سالم در مسیر تابش فوتون‌های مگاولتاژ در پرتودرمانی}, abstract_fa = {زمینه و هدف: حفاظت ارگان­های حیاتی سر راه اشعه یکی از مقولات مهم رادیوتراپی می­باشد. آلیاژ سروبند رایج­ترین ماده­ای است که جهت ساخت شیلد به کار می­رود و تا چندین بار ذوب شده و برای بیماران مختلف به­کار می­رود. در این مطالعه، به بررسی تغییرات ضریب تضعیف بلوک سروبند در اثر ذوب شدن پرداخته شده است که آیا ضریب تضعیف بلوک سروبند در اثر ذوب شدن تغییر می­کند؟ روش بررسی: در کورۀ ذوب، سروبند تا 9 بار ذوب شده و توسط دستگاه شتاب دهندۀ واریان بیمارستان گلستان اهواز مورد تابش قرار گرفت و خروجی آن با اتاقک یونش 13CC- اندازه­گیری گردید. سپس با همان میدان، بدون شیلد سروبند، مقایسه شد. سپس ضرایب تضعیف فوتون­های MV6 وMV18 برای دو شیلد در میدان های cm26×6 و cm210×10 در هر مرحله ذوب شدن، اندازه­گیری و با استفاده از نرم­افزار SPSS و آنالیز رگرسیون تجزیه و تحلیل شد. یافته­ها: نتایج تحلیل رگرسیون با 05/0>P نشان داد که بین ضریب تضعیف و تعداد دفعات ذوب، رابطۀ معناداری وجود دارد و با افزایش تعداد دفعات ذوب، ضریب تضعیف افزایش می­یابد. نتیجه­گیری: ضریب تضعیف بلوک­های سروبند در اثر ذوب شدن متوالی افزایش می­یابد و با اطمینان می­تواند برای بیماران به­کار رود.  }, keywords_fa = {بلوک سروبند,شیلدینگ,کولیماسیون باریکه,جبران‌کننده,ضریب تضعیف}, url = {https://jsmj.ajums.ac.ir/article_50872.html}, eprint = {https://jsmj.ajums.ac.ir/article_50872_ce2d4665db498fd1d3b3872262331cb1.pdf} }