@article { author = {Zakavi, Faramarz and Hosseini Tabatabaei, Somayeh and Bahramnejed, Fatemeh and Sadeghian, Soheila and Khalaj, Kaveh and Pourmahdi boruje, Mahdi}, title = {Comparison of Microhardness of a Composite Core in Two Different Placement Techniques - An Invitro Study}, journal = {Jundishapur Scientific Medical Journal}, volume = {11}, number = {1}, pages = {27-34}, year = {2012}, publisher = {Ahvaz Jundishapur University of Medical Sciences}, issn = {2252-052X}, eissn = {2252-0619}, doi = {}, abstract = {Background and Objective: The purpose of this study was laboratory comparison of microhardness values in one kind of composite core at complete building tooth with incremental and Bulk placement techniques. Subjects and Methods: Ten cylindrical samples of clearfil photo core-light cure (Kuraray/Japan), (Translucent, Single Shade) composite were prepared up to 9mm in Insulin syringes. Half of them were built with incremental placement technique by 2 mm increments and the other half were built with bulk placement technique. Light curing was done with output irradiance of 650 mw/cm2 for 40 seconds. Samples were cut in longitudinal position and were mounted in Epoxy resin. Vicker's microhardness was measured from surface of every samples in the 1,2,3,4,5,6,7,8,9 mm depths. Statistical Analyses were done with two-way ANOVA (P<0.05). Results: The micro hardness values of equivalent depths in bulk placement technique were more than incremental placement. There were not significant diffenences among the hardness of 1 to 9 mm depths, in two placement techniques. Conclusion: In order to achieve the suitable curing depth in every composite with regard to its composition and color, we should follow the light curing standard conditions of that special composite.  }, keywords = {Composite Placement Techniques,Hardness Tests,Composite Resin,Degree of Conversion}, title_fa = {مقایسة لابراتواری میزان سختی یک نوع کامپوزیت Core، در دو روش مختلف قراردهی}, abstract_fa = {زمینه و هدف: هدف از این مطالعه، مقایسة لابراتواری میزان سختی یک نوع کامپوزیت کور (Core) در بازسازی کامل دندان،‌ در روش­های قراردهی قطعه­ایو توده­ای(Bulk)  بود. روش بررسی: ده نمونة استوانه­ای از کامپوزیت Clearfil Photo Core-Iight Cure (Kuraray/Japan) که ترنسلوسنت و تک­رنگ است، در سرنگ­های انسولین تا ارتفاع نه میلی­متر تهیه شد. نیمی از آنها با روش قرار دهی قطعه­ای ‌با قطعات دو میلی­متری و نیمی از آنها با روش قراردهی توده­ای ساخته شد. نوردهی با شدت mw/cm2650 و به­مدت 40 ثانیه بود. نمونه­ها به طور طولی برش خورده و در اپوکسی رزین مانت شدند. میکروسختی ویکرز از سطح هر نمونه در عمق­های 1 تا 9 میلی­متری اندازه­گیری شد. یافته­ها: میزان سختی عمق­های معادل، در روش قراردهی توده­ای بیشتر از روش قراردهی قطعه­ای بود. در هر دو روش قراردهی، تفاوت معناداری در سختی بین عمق­های یک تا نه میلی­متری نبود.   نتیجه­گیری: جهت دستیابی به عمق کیورینگ مناسب در هر کامپوزیت، با توجه به ترکیب و رنگ آن، باید شرایط نوردهی استاندارد آن کامپوزیت خاص را رعایت نمود.  }, keywords_fa = {روش‌های قراردهی کامپوزیت,تست‌های سختی‌سنجی,کامپوزیت رزین,درجة تبدیل}, url = {https://jsmj.ajums.ac.ir/article_49463.html}, eprint = {https://jsmj.ajums.ac.ir/article_49463_695df8a2c5a6a8322fbfade064e41ff0.pdf} }