@article { author = {chegeni, nahid and Boveiry Pour, Saleh and Razmjou-Ghalaei, Sasan and GoliAhmadabad, Foad i}, title = {Effect of the Incident Photon Energy and the Thickness of the tungsten Target on the Efficiency of Photoneutron Production for the Treatment of Cancer Patients}, journal = {Jundishapur Scientific Medical Journal}, volume = {15}, number = {6}, pages = {677-684}, year = {2017}, publisher = {Ahvaz Jundishapur University of Medical Sciences}, issn = {2252-052X}, eissn = {2252-0619}, doi = {}, abstract = {Background and Objective:Nowadays boron neutron capture applies as an alternative method to treat some cancers which do not respond to traditional radiation therapy. Considering that the epithermal neutron energy are useful for therapeutic purposes, achieve the maximum flux of the epithermal neutron has always been concerned. The aim of this study was to evaluate the effect of the converter thickness and the photon energy incident on the neutron flux output and energy generated. Subjects and Methods: In this study, using Monte Carlo simulation MCNPX6.2 code, a single pencil photon beam with energies 13, 15, 18, 20, 25 MeV and 2 mm diameter were employed. To optimize the design of the photoneutron target, tungsten target was tested at different thicknesses. Results: The maximum of the neutron flux for all thicknesses and beam energy occurred at neutron energy peak 0.46MeV. Increasing thickness up to 2 cm showed the neutron flux was increased with increases in thickness and followed a downward trend. Conclusion:The photon energy and the thickness of the tungsten target have a significant impact on the total neutron energy, energy spectrum and the average energy neutrons which depending on the neutron energy spectrum required should be selected. The use of a tungsten layer with a thickness of 2 cm and the 15MeV photon energy for production of maximum neutron flux with a minimum average energy is suggested.}, keywords = {radiotherapy,BNCT,photo neutron target}, title_fa = {ارزیابی اثر انرژی فوتون تابشی و ضخامت هدف تنگستنی در بازدهی تولید فوتونوترون جهت درمان بیماران سرطانی}, abstract_fa = {زمینه و هدف: امروزه استفاده از گیر اندازی نوترون توسط بورن روشی جایگزین جهت درمان برخی از سرطان هاست که به روش رادیوتراپی سنتی پاسخ نمی دهند. با توجه به اینکه تنها نوترون­های انرژی متوسط (اپی ترمال) برای اهداف درمانی مفید و کاربردای اند، داشتن حداکثر فلاکی نوترون اپی ترمال مد نظر است. لذا در این تحقیق به بررسی اثر ضخامت مبدل فوتونوترون و انرژی فوتون تابشی بر میزان شار تولید شده و انرژی نوترون­های خروجی پرداخته است. روش بررسی: در این تحقیق به روش شبیه سازی مونت کارلو با استفاده از کد MCNPX6.2، یک چشمه ی فوتونی مدادی تک انرژی با انرژی­های 13, 15, 18, 20, 25MeV به شعاع 2mm مورد ارزیابی قرار گرفت. جهت بهینه سازی طراحی هدف فوتونوترون، هدف تنگستنی با ضخامت­های مختلف مورد بررسی قرار گرفت. یافته­ها: شار نوترون تولید شده برای تمام ضخامت­ها و انرژی فوتون تابشی دارای پیکی در حدود انرژی 0.46MeV بود. با افزایش ضخامت تا 2cm ، شار نوترونی افزایش و سپس با افزایش بیشتر ضخامت یک روند کاهشی را نشان داد. نتیجه­گیری: انرژی فوتون تابشی و ضخامت هدف تنگستنی بر شار نوترونی کل، طیف انرژی و انرژی میانگین نوترونها تاثیر قابل توجهی دارند که با توجه به طیف انرژی نوترون مورد نیاز باید انتخاب شوند. استفاده از یک لایه تنگستن به ضخامت 2 سانتیمتر و انرژی فوتون برخوردی 15MeV جهت تولید حداکثر شار با حداقل میانگین انرژی نوترونی پیشنهاد می شود.  }, keywords_fa = {رادیوتراپی,درمان به روش گیراندازی نوترون با بور,هدف فوتونوترون}, url = {https://jsmj.ajums.ac.ir/article_45395.html}, eprint = {https://jsmj.ajums.ac.ir/article_45395_63b3dc893bd466662f96fc959ef052b2.pdf} }